Search Results for: rebar

Introduction Concrete finishing in direct sun means you need shade, moisture control, and smart timing to get a smooth, durable surface. Shade helps slow rapid moisture loss, fogging or misting adds surface cooling, and timing keeps finishing steps aligned with the concrete’s surface condition. Plan ahead to avoid streaks, itching, or surface damage from heat […]

Introduction Salt finish concrete is a textured surface created by applying rock salt to the surface while the concrete is still plastic, then washing away the salt to reveal a speckled, dimpled look. It’s a hands‑on method that reveals a rougher, more industrial texture than a smooth finish. It works best when you want grip

Introduction Calcium chloride can speed up concrete setting, but it is not allowed for every mix or every job. For DIY pours, check product labels and local rules to know if it’s permitted. If you’re unsure, ask the supplier or code authority before using it on your project. In some cases it’s allowed, but in

Introduction Calcium chloride accelerators are concrete additives that speed up early strength and set time. Non-chloride accelerators achieve similar hardening speed without using chloride salts. Both types aim to help a pour gain strength sooner, but they behave differently in practice. Calcium chloride can cause discoloration and may contribute to steel corrosion if moisture and

Introduction Using plastic to cure concrete means covering fresh concrete with plastic to trap moisture and heat and guide a smooth finish. This helps limit discoloration, wrinkling, and soft spots by slowing evaporation. Check local rules and product labels for what type of plastic and how to secure it. Choose a clean plastic sheeting that

Introduction Concrete vibration is the process of removing air pockets and consolidating fresh concrete to improve strength and finish. It helps achieve a dense, smooth slab when working with concrete. This piece compares internal and external methods and what you should know for a DIY job. Internal vibration uses a probe that goes into the

Introduction Adding sand to bagged concrete can change how it flows and how strong it ends up. The right amount improves workability, but too much can weaken the mix. Always test a small batch and follow the product directions. Sand addition often increases the volume of the mix, which can affect formwork and curing time.

Introduction Microfibers are ultra-fine fibers added to concrete to improve toughness and crack control. Macro fibers are coarser, longer fibers that help bridge larger cracks and add toughness. For DIY projects, the choice depends on the expected loads and how much cracking you want to limit. In practice, microfibers are mixed at small doses to

Introduction Re-entrant corner cracks are cracks that form at inner corners where two walls meet and curve back toward the interior. They happen where stresses concentrate as the concrete shrinks, settles, or is loaded in ways that push against those sharp inside corners. You’ll see them as narrow lines or wider gaps that seem to