Search Results for: mortar color

Introduction Bowed tiles are tiles that are not flat, causing uneven edges to sit higher than neighboring tiles. This article explains simple layout tricks to reduce the visible lippage when you install them. It stays practical and hands-on, focusing on what you can do on the job site. Start with a dry layout in small […]

Introduction Hollow tiles occur when the bond between the tile and the substrate fails, leaving empty space behind. You can spot it early by tapping tiles and listening for a dull thud, or feeling movement underfoot. Look for inconsistent grout lines or tiles that crack easily under light load. Correcting course means improving surface prep,

Introduction Tile tenting happens when a floor under the tile lifts or pushes up, creating a tent-like shape. This is usually caused by movement in the subfloor or improper adhesive setup during install. Starting a repair requires finding the source and reworking the substrate and setting materials. Preventing tenting starts with solid prep: fix any

Introduction Sealing natural stone means applying a treatment to reduce absorption and prevent blotchy stains. This guide shows how to test how much liquid the stone takes in and how sealing changes that. Keep in mind that different stones behave differently and results depend on stone type and finish. You’ll learn a simple, real‑world test

Introduction Lippage at outside corners happens when tile edges don’t line up cleanly at the corner. This guide explains how to plan the layout and adjust the cut to make it look intentional. Think ahead by dry-fitting pieces, marking where you will cut, and adjusting your layout to hide small gaps. Check local guidelines and

Introduction Setting tile around valves and shower heads means cutting and fitting tiles so the fixtures sit cleanly with the surrounding tile. It’s a hands-on job that needs precise measurements and careful caulk management. If a cut line falls near a valve, you trim the tile so the edge sits flush and the seam is

Introduction Niche Shelf Slope is the slight tilt you give a small shelf to shed water. It’s a practical, hands-on idea you can implement during builds or upgrades, not a math puzzle. If the edge bowls water, you’ve gone too flat or too steep and you should adjust before sealing. Start by positioning the shelf

Introduction Tile on shower ceilings requires proper sag prevention and careful thinset choice. In plain terms, you want the substrate to stay flat and the tile to bond well from day one. Check the thinset instructions for substrate compatibility and follow the manufacturer’s guidance or local rules to avoid surprises. Start by inspecting the ceiling

Introduction Shower curb waterproofing is the process of sealing the edges and top of the curb to keep water from entering walls and floors. Common failure points include gaps at corners, improper flashing, and neglecting the top edge where shower water can splash. In this article, we’ll cover how to build it right with basic,