Introduction Interior moisture management on block walls is the practice of keeping the wall assembly dry by separating the concrete from finishes with furring, insulation, and a controlled vapor path. This hands‑on approach focuses on airflow, condensation control, and dry finishes rather than relying on the concrete to act as a wet surface. Work with […]
Introduction Vertical cracks in block walls are cracks that run straight up and down the masonry and are often linked to shrinkage or movement in the structure. They can form as the wall settles or as the blocks and mortar dry and adjust over time. Monitoring these cracks involves simple visual checks and noting any
Vertical cracks in block walls: shrinkage vs movement and how to monitor them Read More »
Introduction Hairline plaster cracks are small, fine fractures in plaster that generally indicate minimal movement. Choosing between flexible fillers and setting compounds depends on crack movement, plaster type, and the expected durability of the repair. This article treats the repair as a hands-on, practical task you can approach with basic preparation and care. Flexible fillers
Repairing hairline plaster cracks: flexible fillers vs setting compounds Read More »
Introduction Expansion gaps at slab lines are deliberate spaces that allow concrete and stucco to move with temperature and moisture changes. They help prevent cracks by giving seams somewhere to open and close without telegraphing through the finish. Cracking often occurs when gaps are too small, poorly located, or not sealed properly over time. Detailing
Stucco expansion gaps at slab lines: why they crack and how to detail the break Read More »
Introduction Bottom-edge stucco moisture wicking occurs when capillary rise pulls moisture from the foundation into the lower stucco courses. This guide helps you spot the signs and understand why the drainage plane matters. Look for damp patches, staining, softening, or peeling where the stucco meets the foundation, and check for poor drainage or blocked weep
Introduction A proper exterior concrete slab slopes away from structures to prevent puddles. Keep the surface directional so water flows toward adequate drainage, not toward doors or foundations. This article offers simple layout methods you can use in a real-hand DIY project. Use basic layout tools to mark a gentle, continuous incline and check with
Proper Slope on Exterior Concrete Slabs: Easy Layout Methods That Avoid Puddles Read More »
Introduction Kickout flashing is the metal flange that directs water away from the stucco at a wall opening, helping water not to get behind the siding. This article covers safe cutbacks and how to keep the lap order correct when retrofitting behind existing stucco. If in doubt, check the product label and local rules for
Kickout Flashing Retrofits Behind Stucco: Safe Cutbacks and Correct Lap Order Read More »
Introduction Rust stains on brick happen when metal fasteners or components contact brick and moisture carries iron to the surface. This article covers simple ways to isolate metal and manage runoff so stains don’t form. Think of it as a practical, DIY approach you can do with common tools. Inspect all metal that sits against
Preventing Rust Stains on Brick: Metal Isolation and Runoff Control Read More »
Introduction Stucco too close to grade means the stucco base sits near soil and splash zones, which can trap moisture and invite damage. Common signs include cracking, staining, or peeling where the wall meets the ground, plus any bubbling or powdery finish. Watch for moisture staining, plant growth against the wall, and gaps that let
Stucco Too Close to Grade: Fix Options Short of Full Tear-Down Read More »
Introduction Venetian plaster over existing tile is applying plaster onto a tile surface to create a seamless, stone-like finish. Prep and bond are critical, because you’re sticking plaster to a non-porous base. You’ll need to clean, roughen, and seal as needed, then choose a compatible bonding product and follow its directions. Start with careful prep,
Venetian Plaster Over Existing Tile: Prep, Bond Bridges, and Edge Detailing Read More »
