Search Results for: control joint

Introduction Urethane traffic coatings and acrylic systems are two common deck coatings for concrete that you apply to protect and beautify a surface. This article gives a plain‑language look at how each one works and what to expect from applying them. Areas we support cover common concrete decks and patios in residential settings. For questions […]

Introduction Bentonite sheet waterproofing on foundation walls is a passive barrier that swells when wet to seal against moisture. In a DIY setup, you’re detailing joints, overlaps, and how the membrane interfaces with the wall and any backer boards or insulation. Check manufacturer guidance and local rules for surface prep, fastening methods, and acceptable materials

Introduction Basement slab vapor drive in winter is moisture moving through concrete from the ground, even when floors feel dry. In cold weather, capillary action and ground moisture can push water into coatings, sealing layers, and corner joints. This is a practical, hands-on issue you can see by checking for damp spots and efflorescence along

Introduction Concrete retaining walls are structures that hold back soil and must stay dry and stable. To do that, waterproofing and proper drainage are essential, along with backfill and proper reinforcement. Without addressing hydrostatic pressure, the wall can leak, bow, or fail over time. There are several waterproofing options worth considering, and you should follow

Introduction Efflorescence is the white, powdery or crusty mineral deposit that appears on concrete when water moves minerals to the surface. It happens when moisture inside the slab or plaster carries soluble salts to the surface as it evaporates. Identify sources of moisture—wet curing, rain exposure, groundwater, or humid environments—and understand that surface coatings can

Introduction Drainage for exterior stairs and landings means shaping and directing water away so the surfaces stay safe and dry. Keep a clear slope away from the door and across each tread, and use simple edging or a shallow path to guide water toward a drain or into the surrounding ground. Check your local rules

Introduction Epoxy and polyurethane injections are two concrete crack repair options, chosen based on movement and moisture. Epoxy cures into a stiff bond ideal for solid, non-moving cracks, while polyurethane stays more flexible to absorb tiny shifts. Always check the product label and local rules before committing to one method. In terms of practical differences,

Introduction Routing cracks for sealant means creating clean, engineered gaps in concrete to receive sealant that can accommodate movement. This is a hands-on job where the cut shape and depth influence how well the sealant sticks and lasts. Keep the work plain and practical, focusing on a straight, uniform groove and clean edges. Understanding crack

Introduction Electrochemical re-alkalization and chloride extraction are concrete repair methods aimed at neutralizing acidic attack and removing embedded chlorides from reinforced concrete. In plain terms, these processes use electrical currents to push pH back up and pull harmful chlorides out, so the steel stays safer. Think of it as a general overview you can compare

Introduction Repairing concrete jackhammer damage means rebuilding damaged edges without creating microcracks. Use careful hand tools and proper cleaning to prepare the edge before any repair. Work slowly and check for hollow spots or loose material as you go. Common causes include over-penetration, vibration, and poor initial compaction, which you can look for as cracks,