Search Results for: contractor cement

Introduction Microfibers are ultra-fine fibers added to concrete to improve toughness and crack control. Macro fibers are coarser, longer fibers that help bridge larger cracks and add toughness. For DIY projects, the choice depends on the expected loads and how much cracking you want to limit. In practice, microfibers are mixed at small doses to […]

Introduction Re-entrant corner cracks are cracks that form at inner corners where two walls meet and curve back toward the interior. They happen where stresses concentrate as the concrete shrinks, settles, or is loaded in ways that push against those sharp inside corners. You’ll see them as narrow lines or wider gaps that seem to

Introduction An isolation joint is a gap that lets the concrete slab move independently from walls and columns to prevent cracking. In this article we cover where to put them around walls and columns in a DIY-friendly way, not a textbook. Check local rules and manufacturer instructions for placement guidance. Geotechnical soil conditions and reports

Introduction Mix design and sealers are two ways to curb concrete permeability. For DIY projects, focus on practical changes that you can control in the mix and on the surface, rather than quick fixes. Check product labels and manufacturer guidelines for any admixtures and mixing instructions. Sealants can protect the surface after it cures, but

Introduction Concrete creep is the slow, ongoing deformation that happens in hardened concrete under sustained load. It means the material slowly changes shape over time as it bears weight from countertops and shelves. In plain terms, the longer something sits on concrete, the more it can sag or shift a little bit. Common causes include

Introduction Radon rough-in under a slab is routing and sealing a pipe under a concrete floor to vent soil gas safely. Do this with plain instructions: plan the path, verify access, and seal joints to limit leaks, while following local rules and manufacturer notes. Before you start, check local rules and follow any recommended testing

Introduction Cellular concrete is a lightweight concrete mix used for trench backfill and under-slab fill. It is also known as foamed or aerated concrete, and it’s discussed as a DIY-friendly option with attention to local rules and product instructions. It’s not a substitute for every job, so check what your project requires first and follow

Introduction Foamed concrete for insulation is lightweight concrete that includes air voids or foam to slow heat transfer. This article gives a practical, hands-on overview for DIY homeowners. It helps you know what to check on labels or with the manufacturer before you mix or apply it. Common failures include moisture intrusion, cracking, and poor

Introduction Pervious concrete maintenance is the ongoing care you do to keep its water-draining pores open and prevent clogging. Over time, roots, sediment, and debris can fill the pores and slow drainage. This is why it needs regular cleaning and timely repairs, not a one-time fix. Compared with traditional concrete, pervious surfaces require more frequent

Introduction SCC, or self-consolidating concrete, is a flowable mix that settles around dense rebar without vibration. For DIY, this means less hammering and fewer air pockets, but you still need good formwork and clean rebar. Always check the product label and local rules for any restrictions or requirements on your project. Advantages and disadvantages depend