Search Results for: surface prep

Introduction Epoxy-coated rebar is steel reinforcing bar coated with epoxy to resist moisture and corrosion. It’s used in concrete projects where moisture or soil contact is expected. Think of it as a protective shell for rebar in harsher environments. Transport and handling can be different from galvanized bars, so plan how you load, carry, and […]

Introduction Rebar chairs are simple supports that hold the steel rebar off the ground so it stays centered in the slab. They keep the bars at the right height and prevent sagging or contact with the form. On a DIY slab, you install them along a grid to hold the rebars steady during pour. Punching

Introduction Re-entrant corner cracks are cracks that form at inner corners where two walls meet and curve back toward the interior. They happen where stresses concentrate as the concrete shrinks, settles, or is loaded in ways that push against those sharp inside corners. You’ll see them as narrow lines or wider gaps that seem to

Introduction Feather-edge overlay failures happen when the thin edge of a concrete overlay chips or breaks under use. This usually shows up where the overlay tapers to a fine edge and carries a lot of traffic or weight. In plain terms, the edge bore the brunt and started to crumble instead of staying solid. Signs

Introduction Microtopping over old concrete is a thin, decorative concrete top layer that can refresh a worn floor. This article explains how to prepare, mix, and apply it to minimize ghost cracks, delamination, and edge failures. You’ll get a practical, hands-on approach that stays away from textbook theory. Before you start, inspect the surface for

Introduction Microcement in showers is a cement-based coating that creates a continuous, waterproof surface over failure-prone areas. This article explains how to plan the work, coat the walls and floor, and spot potential trouble before sealing. Common waterproofing approaches in showers include membrane types you can install under microcement, but check compatibility with your product

Introduction Mix design and sealers are two ways to curb concrete permeability. For DIY projects, focus on practical changes that you can control in the mix and on the surface, rather than quick fixes. Check product labels and manufacturer guidelines for any admixtures and mixing instructions. Sealants can protect the surface after it cures, but

Introduction MOR, or modulus of rupture, is a measure of how much bending a material can withstand before cracking. Compressive strength is how much load a material can bear when squeezed. For thin overlays, MOR often matters for crack resistance under bending, while compressive strength relates to overall crush resistance. Testing MOR usually involves bending

Introduction Sorptivity is a measure of how quickly a porous material absorbs water through capillary action. In this DIY intro, we’ll keep the test simple and describe what you can observe on a small patch of concrete or plaster. The goal is to get a practical sense of absorption behavior without high-tech gear. Results help