Search Results for: sealer

Introduction Adding drainage to an existing block retaining wall involves improving water handling to prevent pressure buildup behind the wall. It covers surface fixes and partial rebuild options for managing run-off and seepage. This guide stays practical and aims to help you assess signs of drainage problems and choose safe approaches. You’ll start by identifying […]

Introduction Key takeaways Assess project scope to determine sill plate replacement needs on block foundations. Check leveling, shims, and plinth blocks to achieve flat, stable seating. Choose compatible gaskets and moisture barriers to minimize condensation and rot. Proper anchor spacing depends on block height and plate thickness per code. Use correct fasteners and weatherproof coatings

Introduction Interior moisture management on block walls is the practice of keeping the wall assembly dry by separating the concrete from finishes with furring, insulation, and a controlled vapor path. This hands‑on approach focuses on airflow, condensation control, and dry finishes rather than relying on the concrete to act as a wet surface. Work with

Introduction Waterproofing block foundations means choosing between coatings, membranes, or drainage boards to keep moisture from entering the structure. Coatings seal the surface, membranes create a continuous barrier, and drainage boards help direct water away from the wall. Think about how water will contact the wall and what prep is needed before any product is

Introduction Efflorescence is mineral salt deposits that reappear on brick when moisture moves through the wall. If it keeps returning, the moisture path through the masonry is still active. Stopping that path is the first step before you scrub again. Start by tracing where the water is coming from and address leaks, irrigation, or poor

Introduction Smoke staining on exterior brick is the visible discoloration caused by smoke exposure from a chimney or other combustion source. This article helps you identify where it comes from and what to do about it. It focuses on practical, hands-on steps for a DIY cleanup. To diagnose the source, look for patterns of staining

Introduction Interior exposed brick sealing is the process of applying a suitable sealer to brick walls to control dust, adjust sheen, and maintain breathability. The goal is to seal the surface without creating a glossy, non-breathing barrier that traps moisture. This article covers practical steps for choosing products, preparing the surface, and applying sealers in

Introduction Salt damage to brick near sidewalks is deterioration caused by salt exposure that draws moisture and can cause spalling or flaking. This article explains how splashback occurs and what you can do to reduce damage before inspecting or replacing bricks. To approach the job, start by looking for efflorescence, cracks, or loose units near

Introduction Rusting steel lintels over brick openings are corroded structural supports that span the opening and can threaten the masonry. Early signs include rusty stains, cracking joints, and subtle movement around the opening. These issues arise from moisture, age, or poor installation and call for careful assessment before any fixes. Addressing them involves identifying causes