All things about crafting with concrete. Concrete is a versatile material that can be used in many different ways.
Introduction Chalky limewash rub-off is the chalky residue that can smear off if the wash isn’t properly set. The goal is a breathable finish that bonds to the wall without becoming a hard seal. We’ll cover prep, undercoats, and a careful application to keep rub-off in check. Start with clean, sound plaster and remove dust; […]
Chalky Limewash: How to stop rub-off without sealing it too tight Read More »
Introduction Hollow-sounding stucco means the plaster layer is pulling away from the underlying surface, making a thump or hollow note when you tap it. This usually points to debonding or voids behind the stucco. If you hear it, start by confirming where the sound is strongest and what the visible signs are. Use plain, practical
Hollow-Sounding Stucco: Diagnosing debonding and choosing the right repair Read More »
Introduction Stuco over painted masonry is when you apply a new coat of stucco on top of a surface that has old paint on brick or concrete. Before you touch it, check that the paint is firmly bonded and that there are no loose or damaged areas. If the paint is peeling or weak, you’ll
Stucco Over Painted Masonry: Prep steps to prevent bond failure Read More »
