Matt L.

Introduction Radon fan placement is choosing where to install the fan so it can move soil gas from beneath the slab to the outdoors. Pick a location that is accessible for maintenance and close enough to the intake so air can be drawn through the system. Always follow the manufacturer’s instructions and local rules when […]

Introduction A radon rough-in is the collection path, sealed sub-slab details, and capped vent riser installed before or during a slab pour so the home can be tested and, if needed, upgraded later. It is not automatically a working mitigation system: a capped pipe does not reduce radon by itself. Plan the rough-in with the

Introduction A capillary break under slabs is a layer or treatment that stops water from wicking from the soil into the concrete. In plain terms, it keeps moisture away from the slab to prevent dampness and cracking. Choose a method and materials that fit your climate and slab design. Foam-glass options can be used as

Introduction Cellular concrete is a lightweight foamed concrete option, while gravel fill is compacted crushed stone. This article compares them in terms of cost, moisture behavior, and performance for a DIY basement floor. Keep in mind that installation methods vary widely depending on local rules and material specifications. Costs depend on material and labor, and

Introduction Cellular concrete is a lightweight concrete mix used for trench backfill and under-slab fill. It is also known as foamed or aerated concrete, and it’s discussed as a DIY-friendly option with attention to local rules and product instructions. It’s not a substitute for every job, so check what your project requires first and follow

Introduction Foamed concrete for insulation is lightweight concrete that includes air voids or foam to slow heat transfer. This article gives a practical, hands-on overview for DIY homeowners. It helps you know what to check on labels or with the manufacturer before you mix or apply it. Common failures include moisture intrusion, cracking, and poor

Introduction Foamed concrete can make a small cast planter easier to handle than ordinary concrete, but it is not a universal DIY recipe or a structural material. This guide is for small, ground-supported, nonstructural planters made with a specific cellular-concrete product or preformed-foam system. Use the selected product’s technical data sheet and safety data sheet

Introduction Pervious concrete maintenance is the ongoing care you do to keep its water-draining pores open and prevent clogging. Over time, roots, sediment, and debris can fill the pores and slow drainage. This is why it needs regular cleaning and timely repairs, not a one-time fix. Compared with traditional concrete, pervious surfaces require more frequent

Introduction Pervious concrete is a porous patio surface that lets rain pass through interconnected voids into a designed stone reservoir and then into soil, an underdrain, or both. It is not ordinary concrete with a different finish: the open surface, reservoir, native soil, outlet, overflow route, and maintenance all have to work together. Why it

Introduction SCC, or self-consolidating concrete, is a flowable mix that settles around dense rebar without vibration. For DIY, this means less hammering and fewer air pockets, but you still need good formwork and clean rebar. Always check the product label and local rules for any restrictions or requirements on your project. Advantages and disadvantages depend