Search Results for: sealer

Introduction Form leaks and fins are gaps along the slab edge caused when the formwork pulled away during the pour. These gaps can leave a rough edge and may telegraph into the finished slab. For best results, identify the gaps after the concrete cures and plan a seal or cleanup approach that uses standard concrete […]

Introduction Pigment streaks in concrete happen when mixing order and water balance create color bands. This article explains how to mix pigments with cement and manage water so the color stays even. Keep in mind proper timing and consistency as you work. Start by blending pigment powder with a small portion of dry mix before

Introduction Patching that looks patchy when wet means the surface is showing uneven water absorption due to porosity and finishing issues. It often happens when the concrete has inconsistent density or when the finish was applied without addressing bleed water and surface moisture. For DIYers, it’s a hands‑on check of how the surface feels, looks,

Introduction Concrete moisture problems indoors occur when water moves through or sits in the slab, which can undermine coatings and sealers. This movement changes how the surface behaves and can cause failure even after installation. Start by understanding where the moisture is coming from and how the slab dries over time. First, visually inspect for

Introduction Repairing raveled joints means rebuilding the edge of a concrete joint where the surface material has torn loose, without creating a weak, thin strip. Raveling happens when the joint edge flakes or spalls and exposes loose material that won’t hold up under movement. This is a hands-on job: you’ll remove the loose stuff, clean

Introduction An broom finish is a textured concrete surface created by brushing with a broom to leave light ridges that resist slipping. For DIY pours, start with a clean, level surface and plan your broom pattern before you apply any skim coat. Keep the ridges shallow and even to avoid deep marks and to maintain