Search Results for: curing

Introduction Yes, you can paint a concrete floor, but proper prep is essential to prevent peeling. This article walks you through the hands-on steps from surface prep to applying paint. Keep in mind to follow product labels and local rules for prep and use. Start with a clean, dry surface and remove loose dust and […]

Introduction A moisture mitigation system blocks moisture from a concrete floor before you install finishes. It helps prevent staining, mold, and fast finish failures. The approach varies, but the goal is to keep dampness from wicking into your flooring. Watch for signs of moisture damage like peeling coatings, dark patches, or a musty smell. Give

Introduction Protecting PEX in concrete means keeping the tubing safe from damage and movement while it sits in the slab. Sleeving, proper routing, and careful bending help prevent kinks and cracks as the concrete cures. Work carefully on site, verify that sleeves or guards are used where required and follow local guidelines. Use protective sleeves

Introduction Under-slab plumbing sleeves are protective conduits that allow pipes to move slightly under a concrete slab to prevent leaks. They give a controlled path for movement so joints don’t crack or rub on sharp edges. This intro will lay out the practical ideas you’ll need to know when planning or checking sleeves on a

Introduction Termite shields in concrete slabs are physical barriers and detailing practices that help deter termites from entering the structure. They sit at the interface between soil and slab and are installed during pour to block termite paths. Along with proper moisture control and detailing, they reduce the chance termites take up residence. Termites favor

Introduction Frost heave is when the soil pushes up under a slab as water freezes and expands. You’ll notice uneven edges, cracks, or a section that lifts after cold spells. This is a hands-on issue you can spot by watching how the ground around the foundation sits through freezing and thawing cycles. Moisture in the

Introduction Edge thickening is adding extra concrete at the edge of a slab to strengthen it and slow cracking. It helps when you’re edging against forms or when a transition needs more support. If you’re deciding whether you need it, consider the load, use, and the edge exposure—check the project details and local guidelines. Do

Introduction Epoxy setting rebar dowels are epoxy-anchored steel rods installed into concrete to transfer load. Getting the hole size, cleaning, and cure time right is a hands-on, DIY task you can manage with common tools. Check the manufacturer instructions for exact hole diameters, cleaning steps, and cure-time guidance. Hole size requirements vary by product, so