Crafting with Concrete

Introduction Bond failure happens when a concrete patch peels because the new mix won’t adhere to the old surface. It means the patch didn’t bond well to the substrate due to contamination, moisture, or a weak surface. Fixing it starts with identifying the rough spots and cleaning up before rework. To redo it correctly, start […]

Introduction Concrete topping edge curl is when the edge of a thin concrete layer lifts away from the base slab. This article explains what it is and why it happens in plain DIY terms. It’s a hands-on look at how to spot the problem and how to approach prevention. Causes include moisture movement, temperature changes,

Introduction Sealing new concrete can trap moisture and cause peeling later. That moisture gets trapped under the sealer if the surface is still damp or the slab is still curing. Let the concrete cure fully and follow the manufacturer’s guidance before applying any sealer. Before sealing, clean the surface and remove dust, oil, and any