Crafting with Concrete

Introduction Finding studs behind plaster and lath means locating the wall framing behind the plaster so you know where to anchor. In practice, DIY folks use magnets to find fasteners and then verify with a probing method to confirm stud depth. This approach helps you avoid guessing and reduces the risk of drilling into wires […]

Introduction Refastening loose lath is usually the simplest first step to fix plaster that’s pulling away. If the lath is rotten or severely warped, replacement might be the safer option. Check for signs of damp, rot, and whether the plaster remains solid. Decide between refastening and replacing by inspecting the lath condition and the soundness

Introduction Rebuilding lost plaster keys means restoring the grip between plaster and lath so loose or cracked plaster stays put again. It’s a targeted repair that avoids tearing out a whole wall when only the edge bond is failing. Think of it as re-securing the surface so it can be patched cleanly. Start with basic

Introduction Tracking plaster cracks over time means watching how cracks appear and change so you know when to patch. You mark each crack and check it again after a few days or weeks to see if it grows or shifts. Cracks come in hairline, vertical, horizontal, or diagonal forms, and the urgency depends on the

Introduction Plaster dust control means keeping dust confined, vented, and cleaned so a small job stays livable. Set up a defined work area with barriers or plastic, cover floors, and contain the dust to the room you’re working in. Wear appropriate PPE like a dust mask, eye protection, and gloves, and remove loose clothing to

Introduction Interior limewash on plaster is a breathable, traditional finish applied in thin coats to even color and texture. Prep steps include cleaning the wall, dampening the surface, repairing cracks, and applying a compatible breathable primer. Always check the primer and limewash compatibility on the product label or with the manufacturer instructions. Apply multiple thin