Crafting with Concrete

Introduction Sealing a stucco-to-window joint means applying a flexible sealant to the gap to keep water out. Work from clean surfaces, remove old caulk, and mask the edges. Choose a sealant compatible with masonry and windows and follow the label. Start by cleaning the joint and drying it thoroughly. Apply the sealant in a steady

Introduction A failed stucco expansion joint sealant is a broken or failed seal that lets water move through the joint between stucco panels. It shows up as cracks, staining, or moisture near the joint and can worsen with movement. This is a common DIY fix when you want to stop leaks and restore a smooth,

Introduction Yes, you can add a control joint to existing stucco by creating a defined break and backing it with proper trim to control cracking. Key takeaways Assess stucco condition and substrate integrity before planning any control joint. Identify joint type (pre-molded, formed, or saw-cut) suitable for existing stucco. Gather tools: chisel, grinder with diamond

Introduction Control joints are intentional breaks in stucco that give the wall somewhere to move, helping to prevent random cracks. They exist to manage movement from framing, temperature, and moisture rather than to hide cracks after they form. Always check manufacturer guidance and local rules for how wide, where to place, and how to install

Introduction Delamination in stucco occurs when the outer stucco layer loses its bond to the underlying substrate, creating a hollow or tinny sound when tapped. Visually, you’ll see cracks, bubbling, or patches that feel loose or wiggle under pressure. That combination signals a likely delamination that needs closer inspection. To assess it, gently probe suspected

Introduction Repairing stucco holes around pipes, lights, and hose bibs means patching and sealing the open gaps in the exterior surface so water can’t seep in. Identify what caused the hole and what material surrounds it, since different hole types call for different patching approaches. Choose a cement-based patch that fits the hole type and

Introduction Recurring small stucco cracks can be patched, but success depends on whether movement has stopped. Common DIY methods include caulking, meshing with reinforcement, or applying a new coat over the repaired area. Before you patch, assess how many cracks there are and whether they seem to be spreading, which guides your method. Expect patches

Introduction Stucco anatomy is the layered system of lath and coats that makes up traditional exterior stucco. It starts with a sturdy lath as a base, then a scratch coat, followed by a brown coat, and finally a finish coat. This article explains what each layer does and how they work together to protect and

Introduction Identifying your stucco type means distinguishing traditional cement or lime-based stucco from acrylic and EIFS. Traditional stucco is usually cement-based, acrylic uses polymers, and EIFS adds an insulated finish. Check the surface feel, appearance, and any labeling to confirm the type before starting repairs. Have the right tools and materials on hand, including scrapers,