Search Results for: control joint stucco

Introduction Galvanic corrosion is a common issue that affects stucco accessories, particularly metal beads and trims. This process causes rust stains on your otherwise pristine exterior, marring its appearance and potentially leading to more serious damage over time. The good news? Understanding the cause of this problem can help you prevent it from happening again. […]

Rust Stains at Stucco Beads: Start With the Source Orange or brown streaks at a stucco bead, casing bead, reveal, weep screed, or fastener do not prove galvanic corrosion. Ordinary corrosion of exposed or cut steel, water leaking from flashing, and rust bleeding from concealed lath can produce similar stains. Treat galvanic corrosion as a

Introduction Painting stucco with maximum breathability means choosing and applying coatings that let moisture vapor move through the wall rather than trapping it behind the finish. In practice that means picking a paint or coating labeled for masonry/stucco breathability and preparing the surface so the coating can adhere and perform; check product labels and manufacturer

Introduction Installing stucco window sills with drip edges and end dams is a crucial step in waterproofing your home’s exterior. But how long does this process take? Let’s break down the timeline so you can plan your DIY project effectively. Whether you’re a seasoned DIYer or a first-timer, understanding the duration of each step will

Introduction A stucco edge beside brick or stone is not one universal detail. The correct termination depends on the stucco system, the wall’s drainage plane, and whether the masonry is full-bed masonry, adhered veneer, framed veneer, a jamb, a roof intersection, or a base-of-wall condition. A visible joint can look simple while the flashing and

Introduction A parapet leak is rarely solved by filling the nearest crack. Water may enter at a coping joint, a roof-membrane-to-wall transition, a wall crack, a penetration, a window intersection, or—when dampness occurs without rain—from condensation. A durable repair restores the water-shedding layers in the right order: roof flashing and coping first, then the wall

Introduction Mounting solar cable clips on stucco means choosing the right fastener and sealant so the clips hold securely without cracking the finish. Think like a tradesman: use fasteners and anchors rated for masonry and a compatible exterior sealant, and check product labels and local rules for load and weather guidance. Take the time to

Introduction Stucco penetrations for electrical conduit are the sleeve and sealing details that keep water out where the conduit passes through the stucco wall. In practice that means a rigid sleeve or short piece of conduit, a backing, and a proper sealant or flashing so water sheds away from the opening; check product labels and

Introduction Deck ledger through stucco means installing the ledger board and flashing so water shed from the deck doesn’t get behind the stucco; it’s a retrofit move to tie the ledger into the house while preserving the wall’s drainage plane. This usually involves removing a section of stucco and lath to access the sheathing or

Introduction Stucco around roof-to-wall kickout flashing is the detail where the siding meets the roof and the flashing diverts water away from the wall; fixing it means making sure the flashing, substrate, and stucco meet cleanly so water can’t get behind the finish. This is a hands-on job that usually involves removing a bit of