Search Results for: concrete chip repair

Introduction Tile tenting happens when a floor under the tile lifts or pushes up, creating a tent-like shape. This is usually caused by movement in the subfloor or improper adhesive setup during install. Starting a repair requires finding the source and reworking the substrate and setting materials. Preventing tenting starts with solid prep: fix any […]

Introduction Tile cleaners that damage grout are products that break down the cementitious grout or its seal, causing staining or crumbling. They can be overly acidic, abrasive, or leave residues that attract dirt. Always check labels and test on a small area first. Safer options include pH-neutral cleaners, mild dish soap with water, or grout-safe

Introduction Setting tile around valves and shower heads means cutting and fitting tiles so the fixtures sit cleanly with the surrounding tile. It’s a hands-on job that needs precise measurements and careful caulk management. If a cut line falls near a valve, you trim the tile so the edge sits flush and the seam is

Introduction Shower curb waterproofing is the process of sealing the edges and top of the curb to keep water from entering walls and floors. Common failure points include gaps at corners, improper flashing, and neglecting the top edge where shower water can splash. In this article, we’ll cover how to build it right with basic,

Introduction Replacing one cracked tile means removing the damaged piece and installing a new tile while protecting the tiles next to it. This is a hands‑on repair that focuses on keeping the surrounding area intact and level. You’ll want to plan, gather the right tools, and work carefully to avoid creating new cracks. Safety comes

Introduction Nosing options are the edge finishes and trim pieces that protect and neatly finish the front edge of each stair tile when you tile stairs. Start with clean, dry stair surfaces and plan where each tile will sit so you don’t trap edges. Choose nosing profiles that suit your tread depth and check adhesive

Introduction Epoxy grout is a two-part, resin-based grout that resists stains and water better than cement grout. Cement grout is a lime- or cement-based mix that can be easier to work with but may need sealing. This piece will help you decide when epoxy is worth the extra effort. Epoxy grout tends to be more

Introduction Grout joint sizing is choosing the gap between tile edges, and 1/16 inch is a common target. This article gives a practical, hands-on look at what that size means for your install. Always check manufacturer guidelines and local rules if you’re unsure about what works with your tiles and substrate. Tile size and type

Introduction Removing tile without destroying the substrate means lifting the tile and backing material carefully while protecting the surface underneath. Have the right tools ready, like a chisel, a pry bar, and an oscillating multi-tool with a scraper blade, and plan your work so you don’t pry blindly. Start by testing a corner tile and

Introduction A diamond hole saw with careful technique can cut clean, crack-free holes in tile. This introduction explains the practical, hands‑on approach you’ll use to drill through ceramic or porcelain tile without damaging the surrounding material. You’ll want the right tools and steady steps to manage dust and avoid chips. Check manufacturer instructions for drill