Crafting with Concrete

Introduction Loose plaster repair with washers is a simple method to reanchor plaster that has pulled away by using washers driven into solid backing and secured with screws. You’ll space the anchors to grip the edge of the plaster and reach solid backing behind it. Then you can tighten until the plaster sits firmly without […]

Introduction Limewash on interior plaster is a breathable, mineral coating you apply in thin layers to color and protect plaster while letting moisture move through. It goes on over clean, sound plaster that has had any dust or loose material removed and allowed to dry. Think of it as a simple, natural finish you build

Introduction Lime plaster compatibility means using a mix that can bond to existing walls without trapping moisture. It requires considering the old wall material and ensuring the new plaster can move with it. Always check the wall for moisture or stability before patching. To patch, clean and roughen the surface, then apply a lime-based plaster

Introduction Injecting adhesive behind loose plaster is a technique to reattach it by forcing glue into the gap behind the plaster. It can work when the substrate is sound and the plaster isn’t too far detached. Check the wall for hollow spots and test fit before you start. This approach can fail when the backing

Introduction Lime plaster is plaster that uses lime as the binder and cures by carbonation. Gypsum plaster uses gypsum as the binder and sets through a chemical hardening process. In the field, you can get a sense of which one you’re dealing with by how it behaves when you scratch it and when it absorbs

Introduction Hairline plaster cracks are tiny surface splits that reveal movement in the wall and don’t always mean the plaster is failing. This article helps you decide when to fill them with patching material and when you should reinforce to stop them from growing. Look for cracks that appear after weather changes or settling to

Introduction A smooth plaster finish comes from controlled trowel pressure and proper timing. That means pressing evenly as you float or skim, and watching the set so you don’t pull or push too much. You’ll get a better look if you keep strokes consistent and work in small, overlapping sections. Check the plaster’s working time

Introduction Casein paint on plaster is a natural, milk-protein based paint that creates a matte, breathable finish on plaster walls. This approach is useful when you want a soft look, easy touch-ups, and a traditional feel. Before you start, test a small area and check the product label for compatibility with plaster and existing finishes.

Introduction Breathable finishes for lime plaster are coatings that let moisture pass through while protecting the wall. They’re chosen to prevent damp buildup and to keep the plaster performing over time. Check product labels and manufacturer instructions to confirm breathability and suitability for lime plaster. Use lime-putty-based finishes or mineral paints labeled breathable. Avoid latex-based