Matt L.

Introduction Back-buttering tile is applying a thin layer of adhesive to the back of the tile before setting it. This helps improve contact on rough backs or when setting over a slick surface. Check your tile and thinset instructions to see if back-buttering is recommended for your project. It can be overkill for small, uniform […]

Introduction A tile leveling system helps you keep tiles flat and evenly spaced while you set them. Use it to hold grout lines steady as you tile, but don’t rely on it alone. Follow manufacturer instructions for setup and removal, and check your local rules. Decide if you need it based on tile size, surface,

Introduction Tile spacers, wedges, and leveling systems are tools to keep tiles aligned and at a consistent height while you set them. They each serve different roles in the job, and using the right one helps prevent lippage and misalignment. Trust the product label and manufacturer instructions for how to install and use them on

Introduction Tile layout math is the practical planning you do to place tiles so doorway cuts aren’t awkward. This approach helps you spot where full tiles fit and where a cut will be needed closer to entryways. Check local guidelines and the tile manufacturer’s instructions for any specific requirements. Start with a dry layout on

Introduction The money line is a primary reference line you establish from a starting edge to guide tile layout. It helps you keep the pattern centered and saves adjustments later. Check your layout with straightedge checks and confirm your starting points before you set adhesive. To find it, pick a clean starting edge, snap a

Introduction Flatness means the surface is level enough for the tile to sit without rocking. For large-format tile, you’re looking for a smooth plane free of noticeable high spots and dips. If you find trouble spots, plan to adjust with patches, self-leveling compound, or correct substrate issues after checking manufacturer instructions. You’ll want to walk

Introduction Your tile substrate must be flat, solid, and clean before you start. That means checking for levelness, firm backing, and a dust-free surface. If you find problems, fix them before laying tile. -None>Check the substrate with a straightedge or level and use the right patching or leveling products as directed on the label. Sweep